Continuing Education & Training
Iowa law requires members of every licensed or regulated profession to obtain continuing education as a condition of license renewal. (See Iowa Code section 105.20 and chapter 272C) For each plumbing and mechanical systems board license, the basic requirement is at least 8 hours of classroom instruction during each three-year licensing term. For a course to be valid, both the instructor and the course must be pre-approved by the board.
Learn more about continuing education and training.
Frequently Asked Questions
State Plumbing & Mechanical Codes
- The 2024 Uniform Plumbing Code (UPC) is available online through the International Association of Plumbing and Mechanical Officials (IAPMO) website. Printed copies can be ordered online through IAPMO or online book retailers.
- The 2024 International Mechanical Code (IMC) is available online through the International Code Council (ICC) website. Printed copies may be ordered from ICC or an online book retailer.
Iowa Code
Laws are contained in the Iowa Code. They are enacted by the Iowa Legislature and provide statutory authority to the professional licensure boards.
- Administrative Procedures Act - Iowa Code chapter 17A
- Plumbers, Mechanical Professionals, and Contractors - Iowa Code chapter 105
- Regulation of Licensed Professions and Occupations - Iowa Code chapter 272C
Administrative Rules
The professional licensure boards adopt rules to interpret and implement the Iowa Code. Administrative rules have the force and effect of law.
- Iowa Amendments to Plumbing Code - 481 IAC Chapter 425
- Iowa Amendments to Mechanical Code - 481 IAC Chapter 426
- Admin Authority - 481 IAC Chapter 427
- Licensure Fees - 481 IAC Chapter 428
- Application, Licensure, and Examination - 481 IAC Chapter 429
- Alternate Licensure Pathways - 481 IAC Chapter 430
- Licensee Practice - 481 IAC Chapter 431
- Continuing Education - 481 IAC Chapter 432
- Complaints and Investigations - 481 IAC Chapter 433
- Licensee Discipline - 481 IAC Chapter 434
- Contested Cases - 481 IAC Chapter 435